K03 Master Kit (in stock)
TSPROF K03 Master Sharpening Kit— combines the complete kits of the device and is assembled on the basis of a case with an increased range of sharpening angles, TSPROF Profile K03 Expert.
The modification of the K03 body has no horizontal deviations, the knife is clamped parallel to the table. The modern rack and pinion lift with stepless adjustment allows you to set the angle with an accuracy of 0.05°. The range of working angles is from 7° to 35°, which allows you to sharpen the knives at a total angle of up to 70°.
The movable part is connected to the base by a dovetail, which guarantees absolute precision in setting the angle. And an additional locking screw allows you to rigidly lock the lift during roughing operations.
Whole-milled clamps are made of high-strength aircraft aluminum. Due to the monolithic design of the clamps, their main advantage is the increased resistance to pressure on the abrasive stone, which ensures constant angles. When working with this type of clamp, calibration, and adjustment to different knife shapes are not required. They have a simple and convenient clamping principle (using a single key), allowing you to clamp a variety of knives, including knives with secondary bevels from the spine, folding knives, hunting knives.
The unique rotating mechanism has a wide lever that facilitates rotation and ensures reliable auto-locking of the clip frame. In the rotating mechanism, we use only the most reliable materials: the body of the rotating mechanism is made of hardened steel. Thanks to the system of springs and bearings, the frame turns over without wear of the mechanism.
Sharpen knives with any abrasive you like. The K03 universal abrasive holder supports all stones 6" to 8.5" long and doesn't require 45° bevel on sides.
The 3.5 kg TSPROF steel base holds the sharpener on the table and allows you to work without attaching the sharpening system body with a G-clamp.
A set of diamond plates on blanks allows you to immediately start sharpening. The set includes 5 abrasives on aluminum blanks, suitable for complete sharpening of the knife, from roughing to finishing. Diamond plates on a galvanic bundle provide intensive metal removal and can be used for the cutting edge of a knife that has significant damage (chips, jams, etc.).
Whole-milled fillet clamps are made of aircraft aluminum and are designed for fixing knives with a spine thickness of up to 3.5 mm. The shape of the outer surface is radially convex, allowing you to set the minimum sharpening angles from 7.2°. The clamps are made of a single piece of aluminum, which ensures the symmetry of the installation. Thanks to two gripping points, the deflection of the blade is minimized. It is possible to independently move the clamps along the entire length of the frame. There is no need for calibration. With these clamps, it becomes possible to sharpen knives with "Scandinavian bevels". Suitable for table and fillet-knives with a narrow spine. They make it possible to sharpen: kitchen knives, fillet-knives, keychain-knives, dangerous razors, knives with "Scandi-bevels" and other long narrow knives.
Small universal table - a special clamp designed for sharpening scissors, ice drill knives, chisels and other tools.
Single clamp — is a rotary symmetrical clamp for double-sided sharpening without resetting the knife. The design of the clamp allows you to rigidly and symmetrically clamp knives with complex blade geometry. It is well suited for hunting and folding knives with a wide spine.
K03 Master Kit includes:
- K03 Expert Body with main units
- Set of whole-milled clamps (2 pcs.)
- Set of fillet whole-milled clamps (2 pcs.)
- Single clamp
- Small universal table
- TSPROF steel base
- Set of diamond plates (5 pcs.)
- Allen Wrench 4.0 mm
- Packaging: TSPROF Case
Attention! Keep the instructions for the entire warranty period. Warranty service is carried out only in the presence of instructions.